Silent Hunter Mods Forum
Silent Hunter & on-topic => Silent Hunter 3+4+5 - General Discussion => : badcrc September 06, 2011, 03:13:40 PM
-
Hello all,
Since the launch of silent hunter 5 i was unable to play it because poor performance, so i sticked to Sh4 for a long time.
I was planning to buy a second card to put in to Crossfire mode for more power to play sh5 at normal fps.
The cards need to be same, so i checked the card and found out that the cooling fan looked the same when i got it out of the box(super clean)
after 5 years of running. The fan was not running at all for the last 5 years. Downloaded some tool to check the temp sm01 around 100C ...
No wonder Sh5 whas running like crap. Rivatuner installed and put the fan on 70%. Sh5 runs smooth on 30fps sync frame rate on.
So if anyone has a :
Saphire HD3850 512Mb PCI-e
GPU RV670
Device ID 1002-9505
Subvendor ATI (1002)
Current Performance Level Level 1
Voltage 1.014 V
Technology 56 nm
Die Size 190 nm²
Transistors 666 M
Release Date Nov 19, 2007
DirectX Support 10.1
DirectX Shader Model 4.1
OpenGL Support 3.0
Bios Core Clock 669.00
Bios Mem Clock 829.00
Temperature 46 °C
Core Voltage 1.014 V
BIOS Version 11x-2E6301SA-002
ROPs 16
Shaders 320 unified
Memory Type DDR3
Bus Width 256 Bit
Pixel Fillrate 4.8 GPixels/s
Texture Fillrate 4.8 GTexels/s
Bandwidth 53.1 GB/s
Check your cooler fan, because some of them dont work at all. 85C is the max temp. of this GPU.
Back to the ship :) mat1
Greets
Badcrc